Flexible heaters from ISOTHERM™ are thin, bendable and shaped to fit almost any type of equipment. Heat can be applied to the most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or dependability. Excellent heat transfer results from the heater's thin design and direct bonding to an application. Flexible heaters provide fast heat-up and cool-down rates, uniform heat distribution and high watt densities.
Silicone Rubber Heaters
Product Price: Rs 500 / PieceGet Best Price
Minimum Order Quantity: 50 Piece
Product Brochure
Product Details:
Heater Material
Silicone
Voltage
120 - 600 V AC
Brand
Isotherm
Dielectric strength
2000 V
No of layers
2
Temperature range
60 to 450 Deg F (51 to 232 Deg C)
Silicone Rubber Heaters are composed of fibreglass reinforced silicone rubbers that are rugged, moisture and chemical resistant, flame retardant, have high dielectric strength and are non-toxic. Wire or etched foil heating circuits are positioned between two “wafers” of silicone which provides flexibility and strength. Design versatility permits zones of higher or lower heat concentration as needed. They are capable of flexing and will conform to contoured surfaces. They can also be pre-formed to complex shapes and can withstand mechanical shock and vibration. Designed to meet the requirements of various low and medium temperature applications, they improve heat transfer; speed warm-ups, and decrease wattage requirements. The silicone Fiberglass-reinforced silicone rubber gives the heater dimensional stability without sacrificing flexibility. Thermostats or RTD can be mounted for temperature control. Teflon lead wires can exit any location to make suitable connections. Different mounting methods such as pressure sensitive adhesive, field applied adhesive, Velcro etc. are available according to the requirement. With silicone rubber heaters, heat can be placed where it is needed. These heaters improve heat transfer, speed warm-ups and decrease wattage requirements. Fibreglass-reinforced silicone rubber gives the heater dimensional stability without sacrificing flexibility. Because very little material separates the element from the part, heat transfer is rapid and efficient. The heater construction creates a very thin heater allowing it to fit applications where space is limited.
Features:
Power density: Engineered to meet your application.
Moisture, chemical and radiation resistant.
The heating element is laminated between two layers of 20mil fibreglass reinforced silicone rubber.
Configured for your system.
Get Best QuoteRequest A Callback
FG Heating Tapes
Product Price: Rs 280 / MeterGet Best Price
Minimum Order Quantity: 5 Meter
Product Brochure
Product Details:
Heater Material
Fibre Glass
Power
150 Watts per meter
Size
1 inch
Brand
Isotherm
Country of Origin
Made in India
ISOTHERM™ Fibre Glass Heating Tapes provide efficient, economical custom heating solutions to heat small diameter tubing, pipes, hoses, laboratory reactors, pumps and other system devices. The extreme flexibility and high-quality construction of our full line of industrial tapes allow each product to work in a diverse range of situations and different applications. There are often a unique set of circumstances and requirements for temperature regulation, and our industrial heating tapes offer versatility and adaptability to work in a broad range of environments and conditions. We understand the need for precision in an industrial setting, and we know how a fluctuating temperature can disrupt a laboratory or manufacturing centre. We offer a wide range of industrial heating tapes, with varying sizes, watts-per-square-inch, voltage capacities and insulating materials.
Additional Information:
Item Code: ISO-FGHT
Production Capacity: 1000 Meters/Month
Delivery Time: 1 week
Packaging Details: Carton Box
Get Best QuoteRequest A Callback
Flexible Ceramic Pad Heaters
Product Price: Rs 1,500 / PieceGet Best Price
Minimum Order Quantity: 50 Piece
Product Details:
Power
As Per Customer Requirement
Voltage
As Per Customer Requirement
Brand
Isotherm
Heater Material
Ceramic
Heat treatment
1000 Deg C
Connector Plugs
Brass
Available power
30v (1.35kW), 40v (1.8kW), 60v (2.7kw) or 80v (3.6kW)
Modular designs enable our Flexible Ceramic Pad Heaters to be composed in a number of configurations to suit a wide variety of shapes and sizes. Non-standard sizes are also available so please contact us for these bespoke items. Composed of Nickel-Chrome wire inter-woven throughout the various configurations (Male Camlock) are used at the end of the Tail Beads to connect to Heat Treatment Units. Their flexible structure allows them to be used in either a curved or flat application for the pre- and post-heat treatment of welds. Flexible Ceramic Pad Heaters should be fitted to the component by banding or other secure means. All connectors should also be fully locked.
Features:
Pre and post weld heat treatments.
Smooth functionality.
Fine finishing.
Durable.
Custom designs are available.
Get Best QuoteRequest A Callback
Fibre Glass Heaters
Product Price: Rs 500 / PieceGet Best Price
Product Details:
Types
Strip Heater
Material
Aluminum
Heater Material
Fiberglass
Voltage
240 V
Brand
Isotherm
Temperature
480 Deg C (900 Deg F)
Fibre Glass Heaters are basically used for industrial applications. They have an isolated heating element that is embedded in a glass fibre mat. These heaters are flexible and have no additional insulation so there is a considerably larger amount of heat. They can be used to heat the larger body. Further, they are made up of high quality of raw material that ensures the quality of the product. These heating pads tested by our quality assurance team for safe usage. These heating pads are easily available at a lower price.
Features:
Reliable
Integral Molded Separable Plug
Short-term Exposure Temperature (de-energized)
Fiberglass Insulated
Fast Thermal Response
Get Best QuoteRequest A Callback
Polyimide Film Heater
Product Price: Rs 500 / PieceGet Best Price
Product Details:
Heater Material
Polyimide
Voltage
120 V
Power
1000 W
Brand
Isotherm
Operational temperatures
260 Deg C
Polyimide Heaters provide the thinnest profile option, typically having an overall thickness of under .007” excluding mounting adhesive. This thinness also enables reliable conformance to curved and irregular surfaces, with the ability to wrap as tight as .25″ radius. The overall thinness of Polyimide heaters also permits the addition of a heater late in the design process. The low profile can be beneficial in fitting within component clearances or between features, not forcing changes in the overall package design. Kapton heaters have a lower temperature threshold than Silicone heaters, peaking at 300F / 150C continuous, higher for short durations. Polyimide heaters, however, do have improved thermal transfer compared to silicone rubber and offer a quicker response on thermal delivery to the surrounding mass. Isotherm™ has the ability to construct custom heaters using alternative and more exotic material so please speak with an application engineer if a higher temperature rating is required.
Features:
Provide heat where it’s needed to reduce operating costs.
Flexible Mica Heater series is engineered with a wide range of customizable watt densities for different heat outputs, whether a variable, single or multiple densities. These heaters are created to utilize in many types of equipment, including thermocouples, thermistors, temperature sensors, thermal fuses and thermostats. They are designed with Sensing and Control (S&C) technology that is perfectly fitted for telecommunication and medical industries. Furthermore, these come in variants made to suit the client's needs. From spiral, composite, transparent, flat, moulded-to-shape and high-temperature customizations, these present different shapes and designs that are made from durable materials including select dielectric parts and silicone parts.
Features:
Provide heat where it’s needed to reduce operating costs.
Fast and efficient thermal transfer.
Uniform thermal performance by custom profiling.
Customized options for turnkey thermal solutions.
Get Best QuoteRequest A Callback
Quartz Cloth Heaters
Product Price: Rs 1,500 / PieceGet Best Price
Minimum Order Quantity: 50 Piece
Product Details:
Brand
Isotherm
Temperature
800 Deg C (1470 Deg F)
Phase
3 Phase
Material
Quartz Cloth
Frequency
50 Hz
Voltage
240 V
Quartz Cloth Heaters are basically used for high-temperature industrial applications. They have an isolated heating element that is embedded in a quartz fibre mat. These heaters are flexible and have no additional insulation so there is a considerably larger amount of heat. They can be used to heat a larger body. Further, they are made up of high quality of raw material that ensures the quality of the product. These heating pads tested by our quality assurance team for safe usage. These heating pads are easily available at a lower price.
Features:
Reliable
Integral Molded Separable Plug
Short-term Exposure Temperature (de-energized)
Quartz Fibre Insulated
Fast Thermal Response
Get Best QuoteRequest A Callback
Quartz Heating Tapes
Product Price: Rs 650 / MeterGet Best Price
Product Details:
Material
Ceramic
Usage/Application
Heaters
Voltage
As Per Customer Requirement
Heater Material
Quartz Glass
Power
300 Watts per meter
Size
1 inch
Brand
ISOTHERM
ISOTHERM™ Quartz Heaters are used for high-temperature industrial applications. They provide efficient, economical custom heating solutions to heat small diameter tubing, pipes, hoses, laboratory reactors, pumps and other system devices. The extreme flexibility and high-quality construction of our full line of industrial tapes allow each product to work in a diverse range of situations and different applications. There are often a unique set of circumstances and requirements for temperature regulation, and our industrial heating tapes offer versatility and adaptability to work in a broad range of environments and conditions. We understand the need for precision in an industrial setting, and we know how a fluctuating temperature can disrupt a laboratory or manufacturing centre. We offer a wide range of industrial heating tapes, with varying sizes, watts-per-square-inch, voltage capacities and insulating materials.
